Debian GNU/Linux on Dell Inspiron 1520 : Ramakrishnan's website

Introduction

I ordered a Dell Inspiron 1520 from Dell India on December 13th 2007. I was told that the machine will arrive on Jan 2nd 2008, but it arrived on Dec 28th 2008 itself. Dell sent a technician to open and verify that the hardware is working. There was no option to order this particular laptop with no OS installed, so I reluctantly selected the Windows XP option, which was the cheapest and default. Dell India has no WIndows Refund program, so I had to do away with that reluctantly, thus becoming a Microsoft customer for the second time (first time I became their customer was when I bought their Natural Keyboard, which is the one and only wonderful product manufacturered by Microsoft till date, in my opinion).
Specifications

The good thing about Dell is that one can select the components which goes into the system, pretty much the way one would build a desktop system from components. Of course it is not so flexible, but there are some wide variety of component selections available with varied price points and features. I choose some high end components and some not so high end ones. I have always found it best to chose those components which fall on the knee-point in the prive vs performance curve. There is no point paying a fortune for a 2.2 GHz processor knowing very well that, that extra 200 MHz is not going to make a drastic performance difference.

I also avoided those manufacturers who are Free Software unfriendly, like nVidia. I will not buy an nVidia product unless they make their specifications public or publish source code. The next big company I wanted to boycott was Broadcom, as they have made no effort to publish the specs for their Wireless devices. That way, Intel is also not a good choice, but better among the lot. Particularly, the Wireless chip IPW3945abg uses a binary-only microcode, though the driver code itself is Free. But non-free firmware is non-free software too.

So here are components that make up my Inspiron 1520.

Intel Core 2 Duo T7300, 2 GHz CPU
Intel X3100 Graphics
Intel Pro Wireless 3945abg
Intel HD Audio Controller with Sigmatel STAC9205 Codec
160 GB S-ATA Harddisk
2 GB DDR2 SDRAM
UVC Webcam
SD Card Reader
V.90 Modem
Standard Ports (USB, Firewire, IR etc)
15.4″ WXGA 1440×900 LCD display (glossy)
Broadcom BCM4401 100BaseT Ethernet
Did I miss anything …. ?

Preparing to Install Debian GNU/Linux

The laptop by default came with Windows XP Home edition. I needed to make room for installing the Debian GNU/Linux. Having not done any partition and resizing for quite some time, I did a bit of search on the web and found that one need to defragment the NTFS partition. I decided to restrict Windows to 15GB and allocate the rest to GNU/Linux.

Now, the Dell Inspiron laptops come with a wierd disk layout. Here is the initial rough layout when I opened the box.

80 MB – Dell Utility partition (primary)
155 MB – Windows XP (primary)
80 MB (?) – system restore (logical)
2.5 GB – Dell MediaDirect partition (logical)

I deleted the system restore and MediaDirect partitions. After booting into Windows, I download this nifty GPLed program called jkdefrag from the web and defragmented the WinXP partition. Then I downloaded the excellent SystemRescue CD Image and used it to resize the NTFS partition to 15 GB.

I then created the new layout which looks like this.

/dev/sda1           1           10            80293+   de    Dell Utility
/dev/sda2    *     11         1922          15358140    7    HPFS/NTFS
/dev/sda3        1923         9217         58597087+   83    Linux
/dev/sda4        9218        19457          82252800    5    Extended
/dev/sda5        9218        19332          81248706   83    Linux
/dev/sda6       19333        19457           1004031   82    Linux swap

Installing Debian

I used the Debian testing (lenny) netinst ISO image to create the netinst CD so that I can install everything off the web. I choose to select the tasks “Desktop” and “laptop” inaddition to the “standard” system. After downloading some 700 odd MB of data, the netinst garbled the screen while attempting to configure X. I had no option but start all over again. This time I choose the “standard” system alone, no “Desktop” or “laptop” mode. This installed a small but usable base system. I then got installed the rest of the system one by one using apt-get.

Installing GNOME Desktop and X was fine. No surprises. X config program detected the Intel X3100 graphics chip automatically.

Harddisk Care

Wireless Networking

Debian testing came with the pre-IWL drivers. i.e. Intel daemon and ifw3945abg drivers. I upgraded to ‘unstable’ tree two weeks back (mid of March 2008) and got the iwlwifi drivers and removed the binary-only daemon.

The binary daemon had a lot of issues. During long data transfers, wireless interfaces used to disappear after transferring around 8-10 MB of data. This used to hang the entire system.

Sound

Didn’t work with the 2.4.22 kernel which came with testing. I compiled 2.6.24.4 and upgraded alsa packages and sound worked like a charm. While compiling the kernel, make sure to enable “Intel HD Audio”. You need ALSA version 1.0.15 or above.

On my system:

# cat /proc/asound/version
Linux shannon 2.6.24.4 #1 SMP PREEMPT Wed Mar 26 22:55:37 IST 2008 x86_64 GNU/Linux
Webcam

# apt-get install module-assistant linux-uvc-source luvcview

# m-a a-i linux-uvc

# modprobe uvcvideo

This should create a device /dev/video0. Try opening luvcview and see if you can see yourself on the screen. Or do:

$ mplayer -fps 30 tv://

CPU Frequency Scaling

To save power, modern Mobile CPUs do frequency scaling (Power = c * f * V^2, where c is a constant, V is the voltage and f is the frequency). It worked out of the box with the stock Debian kernel (2.6.22-3 at this point). The GNOME CPU Scaling Monitor applet shows the current frequency. In my system, it shows 800MHz. When I do anything more intensive, like compiling a program, it switches to 2.0 GHz.

BIOS Upgrade

Suspend to Ram and Suspend to disk

Suspend to ram works fine. Do:

# apt-get install uswsusp hibernate gnome-power-manager

To do a suspend to ram, do

# s2ram -f -p -m

The only quirk is that the Harddisk Power Management settings get reset, so I can hear the harddisk clicks, which is a sign of Load/Park cycles happening on your disk head.

This webpage had been instrumental in getting suspend-to-ram to work. Now I need to tackle suspend to disk.

Misc

xorg.conf

dmidecode output

# dmidecode 2.9SMBIOS 2.4 present.

45 structures occupying 1979 bytes.
Table at 0x000F7180.Handle 0xDA00, DMI type 218, 251 bytes
OEM-specific Type
Header and Data:
DA FB 00 DA B2 00 0D 5F 1F 37 40 7D 00 00 00 00
00 7E 00 02 00 00 00 40 00 04 00 01 00 41 00 04
00 00 00 65 00 05 00 00 00 66 00 05 00 01 00 5E
00 06 00 01 00 5F 00 06 00 00 00 89 01 07 00 00
00 8A 01 07 00 01 00 42 00 08 00 01 00 43 00 08
00 00 00 55 00 09 00 00 00 6D 00 09 00 01 00 2D
00 0A 00 02 00 6E 00 0A 00 01 00 2E 00 0A 00 00
00 11 01 0B 00 00 00 10 01 0B 00 01 00 F0 00 0C
00 01 00 ED 00 0C 00 00 00 41 01 0D 00 01 00 40
01 0D 00 00 00 47 01 0E 00 01 00 46 01 0E 00 00
00 4A 01 0F 00 00 00 4B 01 0F 00 01 00 52 01 10
00 01 00 53 01 10 00 00 00 80 01 11 00 01 00 7F
01 11 00 00 00 7C 01 12 00 01 00 7B 01 12 00 00
00 7E 01 13 00 01 00 7D 01 13 00 00 00 92 01 14
00 00 00 91 01 14 00 01 00 94 01 15 00 00 00 93
01 15 00 01 00 FF FF 00 00 00 00

Handle 0xDA01, DMI type 218, 251 bytes

OEM-specific Type

Header and Data:

DA FB 01 DA B2 00 0D 5F 1F 37 40 86 01 16 00 01
00 85 01 16 00 00 00 82 01 17 00 01 00 81 01 17
00 00 00 84 01 18 00 01 00 83 01 18 00 00 00 9B
01 19 00 00 00 9C 01 19 00 01 00 9D 01 19 00 02

00 9E 01 19 00 03 00 8B 01 1A 00 00 00 8C 01 1A

00 01 00 EA 00 1B 00 00 00 EB 00 1B 00 01 00 EC

00 1B 00 02 00 28 00 1C 00 00 00 29 00 1C 00 01

00 2A 00 1C 00 02 00 2B 00 1D 00 00 00 2C 00 1E

00 00 00 E7 00 1F 00 01 00 E6 00 1F 00 00 00 0E

01 20 00 01 00 0F 01 20 00 00 00 9B 00 21 00 01

00 9C 00 21 00 00 00 4D 01 22 00 01 00 4C 01 22

00 00 00 01 01 23 00 00 00 02 01 23 00 01 00 04

01 23 00 02 00 37 01 24 00 00 00 38 01 24 00 01

00 D9 01 25 00 01 00 D8 01 25 00 00 00 EA 01 26

00 00 00 EB 01 26 00 01 00 EC 01 27 00 00 00 ED

01 27 00 01 00 FF FF 00 00 00 00

Handle 0xDA02, DMI type 218, 53 bytes

OEM-specific Type

Header and Data:

DA 35 02 DA B2 00 0D 5F 1F 37 40 76 01 76 01 01

00 75 01 75 01 01 00 01 F0 01 F0 00 00 02 F0 02

F0 00 00 03 F0 03 F0 00 00 04 F0 04 F0 00 00 FF

FF 00 00 00 00

Handle 0x0000, DMI type 0, 24 bytes

BIOS Information

Vendor: Dell Inc.

Version: A04

Release Date: 11/05/2007

Address: 0xF0000

Runtime Size: 64 kB

ROM Size: 1024 kB

Characteristics:

ISA is supported

PCI is supported

PC Card (PCMCIA) is supported

PNP is supported

BIOS is upgradeable

BIOS shadowing is allowed

Boot from CD is supported

Selectable boot is supported

3.5"/720 KB floppy services are supported (int 13h)

Print screen service is supported (int 5h)

8042 keyboard services are supported (int 9h)

Serial services are supported (int 14h)

Printer services are supported (int 17h)

CGA/mono video services are supported (int 10h)

ACPI is supported

USB legacy is supported

AGP is supported

Smart battery is supported

BIOS boot specification is supported

Function key-initiated network boot is supported

Targeted content distribution is supported

BIOS Revision: 0.4

Firmware Revision: 0.4

Handle 0x0100, DMI type 1, 27 bytes

System Information

Manufacturer: Dell Inc.

Product Name: Inspiron 1520

Version: Not Specified

Serial Number: 6JBSS1S

UUID: 44454C4C-4A00-1042-8053-B6C04F533153

Wake-up Type: Power Switch

SKU Number: Not Specified

Family:

Handle 0x0200, DMI type 2, 9 bytes

Base Board Information

Manufacturer: Dell Inc.

Product Name: 0KY767

Version:

Serial Number: .6JBSS1S.CN486437B20120.

Handle 0x0300, DMI type 3, 13 bytes

Chassis Information

Manufacturer: Dell Inc.

Type: Portable

Lock: Not Present

Version: Not Specified

Serial Number: 6JBSS1S

Asset Tag: Not Specified

Boot-up State: Safe

Power Supply State: Safe

Thermal State: Safe

Security Status: None

Handle 0x0400, DMI type 4, 40 bytes

Processor Information

Socket Designation: Microprocessor

Type: Central Processor

Family: <OUT OF SPEC>

Manufacturer: Intel

ID: FA 06 00 00 FF FB EB BF

Version: Not Specified

Voltage: 3.3 V

External Clock: 200 MHz

Max Speed: 2000 MHz

Current Speed: 2000 MHz

Status: Populated, Enabled

Upgrade: None

L1 Cache Handle: 0x0700

L2 Cache Handle: 0x0701

L3 Cache Handle: Not Provided

Serial Number: Not Specified

Asset Tag: Not Specified

Part Number: Not Specified

Core Count: 2

Core Enabled: 2

Thread Count: 2

Characteristics:

64-bit capable

Handle 0x0700, DMI type 7, 19 bytes

Cache Information

Socket Designation: Not Specified

Configuration: Enabled, Not Socketed, Level 1

Operational Mode: Write Back

Location: Internal

Installed Size: 32 KB

Maximum Size: 32 KB

Supported SRAM Types:

Unknown

Installed SRAM Type: Unknown

Speed: Unknown

Error Correction Type: None

System Type: Data

Associativity: 4-way Set-associative

Handle 0x0701, DMI type 7, 19 bytes

Cache Information

Socket Designation: Not Specified

Configuration: Enabled, Not Socketed, Level 2

Operational Mode: Varies With Memory Address

Location: Internal

Installed Size: 4096 KB

Maximum Size: 4096 KB

Supported SRAM Types:

Pipeline Burst

Installed SRAM Type: Pipeline Burst

Speed: 15 ns

Error Correction Type: None

System Type: Unified

Associativity: Other

Handle 0x0804, DMI type 8, 9 bytes

Port Connector Information

Internal Reference Designator: USB

Internal Connector Type: None

External Reference Designator: Not Specified

External Connector Type: Access Bus (USB)

Port Type: USB

Handle 0x0806, DMI type 8, 9 bytes

Port Connector Information

Internal Reference Designator: MONITOR

Internal Connector Type: None

External Reference Designator: Not Specified

External Connector Type: DB-15 female

Port Type: Video Port

Handle 0x080B, DMI type 8, 9 bytes

Port Connector Information

Internal Reference Designator: FireWire

Internal Connector Type: None

External Reference Designator: Not Specified

External Connector Type: IEEE 1394

Port Type: Firewire (IEEE P1394)

Handle 0x080C, DMI type 8, 9 bytes

Port Connector Information

Internal Reference Designator: Modem

Internal Connector Type: None

External Reference Designator: Not Specified

External Connector Type: RJ-11

Port Type: Modem Port

Handle 0x080D, DMI type 8, 9 bytes

Port Connector Information

Internal Reference Designator: Ethernet

Internal Connector Type: None

External Reference Designator: Not Specified

External Connector Type: RJ-45

Port Type: Network Port

Handle 0x0A00, DMI type 10, 6 bytes

On Board Device Information

Type: Video

Status: Enabled

Description: Intel Crestline Graphics

Handle 0x0A01, DMI type 10, 6 bytes

On Board Device Information

Type: Sound

Status: Enabled

Description: Sigmatel 9205

Handle 0x0B00, DMI type 11, 5 bytes

OEM Strings

String 1: Dell System

String 2: 5[0003]

String 3: 13[PP22L]

Handle 0x0D00, DMI type 13, 22 bytes

BIOS Language Information

Installable Languages: 1

en|US|iso8859-1

Currently Installed Language: en|US|iso8859-1

Handle 0x1000, DMI type 16, 15 bytes

Physical Memory Array

Location: System Board Or Motherboard

Use: System Memory

Error Correction Type: None

Maximum Capacity: 4 GB

Error Information Handle: Not Provided

Number Of Devices: 2

Handle 0x1100, DMI type 17, 27 bytes

Memory Device

Array Handle: 0x1000

Error Information Handle: Not Provided

Total Width: 64 bits

Data Width: 64 bits

Size: 1024 MB

Form Factor: DIMM

Set: None

Locator: DIMM_A

Bank Locator: Not Specified

Type: DDR

Type Detail: Synchronous

Speed: 667 MHz (1.5 ns)

Manufacturer: 7F7F7F0B00000000

Serial Number: CCE82416

Asset Tag: 000745

Part Number: NT1GT64U8HB0BN-3C

Handle 0x1101, DMI type 17, 27 bytes

Memory Device

Array Handle: 0x1000

Error Information Handle: Not Provided

Total Width: 64 bits

Data Width: 64 bits

Size: 1024 MB

Form Factor: DIMM

Set: None

Locator: DIMM_B

Bank Locator: Not Specified

Type: DDR

Type Detail: Synchronous

Speed: 667 MHz (1.5 ns)

Manufacturer: 7F7F7F0B00000000

Serial Number: 69D82416

Asset Tag: 000745

Part Number: NT1GT64U8HB0BN-3C

Handle 0x1301, DMI type 19, 15 bytes

Memory Array Mapped Address

Starting Address: 0x00000000000

Ending Address: 0x0007FFFFFFF

Range Size: 2 GB

Physical Array Handle: 0x1000

Partition Width: 0

Handle 0x1401, DMI type 20, 19 bytes

Memory Device Mapped Address

Starting Address: 0x00000000000

Ending Address: 0x0007FFFFFFF

Range Size: 2 GB

Physical Device Handle: 0x1100

Memory Array Mapped Address Handle: 0x1301

Partition Row Position: 1

Interleave Position: 1

Interleaved Data Depth: 8

Handle 0x1411, DMI type 126, 19 bytes

Inactive

Handle 0x1402, DMI type 20, 19 bytes

Memory Device Mapped Address

Starting Address: 0x00000000000

Ending Address: 0x0007FFFFFFF

Range Size: 2 GB

Physical Device Handle: 0x1101

Memory Array Mapped Address Handle: 0x1301

Partition Row Position: 1

Interleave Position: 2

Interleaved Data Depth: 8

Handle 0x1412, DMI type 126, 19 bytes

Inactive

Handle 0x1500, DMI type 21, 7 bytes

Built-in Pointing Device

Type: Touch Pad

Interface: Bus Mouse

Buttons: 2

Handle 0x1600, DMI type 22, 26 bytes

Portable Battery

Location: Sys. Battery Bay

Manufacturer: Sanyo

Name: DELL TM9787C

Design Capacity: 52000 mWh

Design Voltage: 11100 mV

SBDS Version: 1.0

Maximum Error: 0%

SBDS Serial Number: 003B

SBDS Manufacture Date: 2007-12-03

SBDS Chemistry: LION

OEM-specific Information: 0x00000001

Handle 0x1B00, DMI type 27, 12 bytes

Cooling Device

Type: Fan

Status: OK

OEM-specific Information: 0x0000DD00

Handle 0x1C00, DMI type 28, 20 bytes

Temperature Probe

Description: CPU Internal Temperature

Location: Processor

Status: OK

Maximum Value: 127.0 deg C

Minimum Value 0.0 deg C

Resolution: 1.000 deg C

Tolerance: 0.5 deg C

Accuracy: Unknown

OEM-specific Information: 0x0000DC00

Handle 0x2000, DMI type 32, 11 bytes

System Boot Information

Status: No errors detected

Handle 0xB000, DMI type 176, 5 bytes

OEM-specific Type

Header and Data:

B0 05 00 B0 01

Handle 0xB100, DMI type 177, 12 bytes

OEM-specific Type

Header and Data:

B1 0C 00 B1 02 00 00 00 00 00 00 00

Handle 0xB200, DMI type 178, 6 bytes

OEM-specific Type

Header and Data:

B2 06 00 B2 99 99

Handle 0xD000, DMI type 208, 10 bytes

OEM-specific Type

Header and Data:

D0 0A 00 D0 01 04 FE 00 F1 01

Handle 0xD800, DMI type 216, 9 bytes

OEM-specific Type

Header and Data:

D8 09 00 D8 01 03 01 F0 03

Strings:

Intel Corp.

1466

Handle 0xD900, DMI type 217, 8 bytes

OEM-specific Type

Header and Data:

D9 08 00 D9 01 02 01 03

Strings:

US-101

Proprietary

Handle 0xDB00, DMI type 219, 9 bytes

OEM-specific Type

Header and Data:

DB 09 00 DB 03 01 02 03 FF

Strings:

System Device Bay

Floppy, Battery, CD-ROM, CD-RW, DVD, DVD+RW, DVD+/-RW, Hard Disk, BLU-RAY

DVD+/-RW

Handle 0xDC00, DMI type 220, 22 bytes

OEM-specific Type

Header and Data:

DC 16 00 DC 01 F0 00 00 02 F0 00 00 00 00 03 F0

04 F0 00 00 00 00

Handle 0xDD00, DMI type 221, 19 bytes

OEM-specific Type

Header and Data:

DD 13 00 DD 00 00 00 00 00 00 00 00 00 00 00 00

00 00 00

Handle 0xD400, DMI type 212, 37 bytes

OEM-specific Type

Header and Data:

D4 25 00 D4 74 00 75 00 00 10 2D 2E 5C 00 78 BF

40 5D 00 78 BF 00 08 00 1D DF 00 03 00 1D DF 00

FF FF 00 00 00

Handle 0xD401, DMI type 212, 17 bytes

OEM-specific Type

Header and Data:

D4 11 01 D4 74 00 75 00 03 40 49 4A FF FF 00 00

00

Handle 0xDE00, DMI type 222, 16 bytes

OEM-specific Type

Header and Data:

DE 10 00 DE 01 02 FF FF 00 00 00 00 00 00 00 01

Handle 0x7F00, DMI type 127, 4 bytes

End Of Table

lspci output

# lspci -vvv00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c)Subsystem: Dell Unknown device 01f1

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

Latency: 0

Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 0c) (prog-if 00 [VGA])

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin A routed to IRQ 16

Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]

Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]

Region 4: I/O ports at eff8 [size=8]

Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-

Address: 00000000  Data: 0000

Capabilities: [d0] Power Management version 3

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Bridge: PM- B3+

00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 0c)

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]

Capabilities: [d0] Power Management version 3

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Bridge: PM- B3+

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin A routed to IRQ 20

Region 4: I/O ports at 6f20 [size=32]

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02) (prog-if 00 [UHCI])

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin B routed to IRQ 21

Region 4: I/O ports at 6f00 [size=32]

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02) (prog-if 20 [EHCI])

Subsystem: Dell Unknown device 01f1

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin C routed to IRQ 22

Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Debug port

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)

Subsystem: Dell Unknown device 01f1

Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Interrupt: pin A routed to IRQ 21

Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

Address: 0000000000000000  Data: 0000

Capabilities: [70] Express Unknown type IRQ 0

Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-

Device: Latency L0s unlimited, L1 unlimited

Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-

Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

Device: MaxPayload 128 bytes, MaxReadReq 128 bytes

Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0

Link: Latency L0s <64ns, L1 <1us

Link: ASPM Disabled CommClk- ExtSynch-

Link: Speed unknown, Width x0

Capabilities: [100] Virtual Channel

Capabilities: [130] Unknown (5)

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

Capabilities: [40] Express Root Port (Slot+) IRQ 0

Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-

Device: Latency L0s unlimited, L1 unlimited

Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

Device: MaxPayload 128 bytes, MaxReadReq 128 bytes

Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1

Link: Latency L0s <1us, L1 <4us

Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-

Link: Speed 2.5Gb/s, Width x0

Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+

Slot: Number 2, PowerLimit 6.500000

Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-

Slot: AttnInd Unknown, PwrInd Unknown, Power-

Root: Correctable- Non-Fatal- Fatal- PME-

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+

Address: fee0300c  Data: 4161

Capabilities: [90] Subsystem: Dell Unknown device 01f1

Capabilities: [a0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [100] Virtual Channel

Capabilities: [180] Unknown (5)

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fe800000-fe8fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

Capabilities: [40] Express Root Port (Slot+) IRQ 0

Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-

Device: Latency L0s unlimited, L1 unlimited

Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

Device: MaxPayload 128 bytes, MaxReadReq 128 bytes

Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2

Link: Latency L0s <256ns, L1 <4us

Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-

Link: Speed 2.5Gb/s, Width x1

Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+

Slot: Number 3, PowerLimit 6.500000

Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-

Slot: AttnInd Unknown, PwrInd Unknown, Power-

Root: Correctable- Non-Fatal- Fatal- PME-

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+

Address: fee0300c  Data: 4169

Capabilities: [90] Subsystem: Dell Unknown device 01f1

Capabilities: [a0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [100] Virtual Channel

Capabilities: [180] Unknown (5)

00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0

I/O behind bridge: 0000d000-0000dfff

Memory behind bridge: fe600000-fe7fffff

Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

Capabilities: [40] Express Root Port (Slot+) IRQ 0

Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-

Device: Latency L0s unlimited, L1 unlimited

Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

Device: MaxPayload 128 bytes, MaxReadReq 128 bytes

Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4

Link: Latency L0s <1us, L1 <4us

Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-

Link: Speed 2.5Gb/s, Width x0

Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+

Slot: Number 5, PowerLimit 6.500000

Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-

Slot: AttnInd Unknown, PwrInd Unknown, Power-

Root: Correctable- Non-Fatal- Fatal- PME-

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+

Address: fee0300c  Data: 4171

Capabilities: [90] Subsystem: Dell Unknown device 01f1

Capabilities: [a0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [100] Virtual Channel

Capabilities: [180] Unknown (5)

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin A routed to IRQ 20

Region 4: I/O ports at 6f80 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin B routed to IRQ 21

Region 4: I/O ports at 6f60 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin C routed to IRQ 22

Region 4: I/O ports at 6f40 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02) (prog-if 20 [EHCI])

Subsystem: Dell Unknown device 01f1

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin A routed to IRQ 20

Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Bus: primary=00, secondary=03, subordinate=03, sec-latency=32

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fe500000-fe5fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

Capabilities: [50] Subsystem: Dell Unknown device 01f1

00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 02)

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Capabilities: [e0] Vendor Specific Information

00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin A routed to IRQ 16

Region 0: I/O ports at 01f0 [size=8]

Region 1: I/O ports at 03f4 [size=1]

Region 2: I/O ports at 0170 [size=8]

Region 3: I/O ports at 0374 [size=1]

Region 4: I/O ports at 6fa0 [size=16]

00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin B routed to IRQ 1276

Region 0: I/O ports at 6eb0 [size=8]

Region 1: I/O ports at 6eb8 [size=4]

Region 2: I/O ports at 6ec0 [size=8]

Region 3: I/O ports at 6ec8 [size=4]

Region 4: I/O ports at 6ee0 [size=32]

Region 5: Memory at fe9fb800 (32-bit, non-prefetchable) [size=2K]

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable+

Address: fee0300c  Data: 4191

Capabilities: [70] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [a8] #12 [0010]

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)

Subsystem: Dell Unknown device 01f1

Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Interrupt: pin B routed to IRQ 17

Region 0: Memory at fe9fb700 (32-bit, non-prefetchable) [size=256]

Region 4: I/O ports at 10c0 [size=32]

03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)

Subsystem: Dell Unknown device 01f1

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 64

Interrupt: pin A routed to IRQ 17

Region 0: Memory at fe5fe000 (32-bit, non-prefetchable) [size=8K]

Capabilities: [40] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (rev 05) (prog-if 10 [OHCI])

Subsystem: Dell Unknown device 01f1

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 19

Region 0: Memory at fe5fd800 (32-bit, non-prefetchable) [size=2K]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=2 PME+

03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) (prog-if 01)

Subsystem: Dell Unknown device 01f1

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 64, Cache Line Size: 64 bytes

Interrupt: pin B routed to IRQ 18

Region 0: Memory at fe5fd400 (32-bit, non-prefetchable) [size=256]

Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 12)

Subsystem: Dell Unknown device 01f1

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 64, Cache Line Size: 64 bytes

Interrupt: pin B routed to IRQ 4

Region 0: Memory at fe5fd500 (32-bit, non-prefetchable) [size=256]

Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)

Subsystem: Dell Unknown device 01f1

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 64, Cache Line Size: 64 bytes

Interrupt: pin B routed to IRQ 4

Region 0: Memory at fe5fd600 (32-bit, non-prefetchable) [size=256]

Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)

Subsystem: Dell Unknown device 01f1

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 64, Cache Line Size: 64 bytes

Interrupt: pin B routed to IRQ 4

Region 0: Memory at fe5fd700 (32-bit, non-prefetchable) [size=256]

Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-

0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)

Subsystem: Intel Corporation Unknown device 1020

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 17

Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]

Capabilities: [c8] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

Address: 0000000000000000  Data: 0000

Capabilities: [e0] Express Legacy Endpoint IRQ 0

Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-

Device: Latency L0s <512ns, L1 unlimited

Device: AtnBtn- AtnInd- PwrInd-

Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-

Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+

Device: MaxPayload 128 bytes, MaxReadReq 128 bytes

Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0

Link: Latency L0s <128ns, L1 <64us

Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-

Link: Speed 2.5Gb/s, Width x1

Capabilities: [100] Advanced Error Reporting

Capabilities: [140] Device Serial Number 3a-f8-79-ff-ff-bf-1c-00

To be continued…

Ramakrishnan's website

Debian GNU/Linux on Dell Inspiron 1520

Elsewhere